Install and Configure VMware ESXi 6.0

There are few system requirements that must be met before you can install ESXi 6.0 server:
- Make sure the server hardware that you are going to install ESXi server on is supported by VMware vSphere. You can check that using VMware Compatibility Guide.
- The physical server must have 64-bit processors with at least two CPU cores.
- The physical server must have minimum of 4GB of RAM. You need at least 8GB memory to install a virtual machine after ESXi server is installed.
- The NX/XD bit must be enabled in the BIOS. Intel-VT for Intel processors and AMD-V for AMD processors.
- The physical server must have one or more Gigabit Ethernet adapter.
- Compatible disk storage.

Install and Configure VMware ESXi 6.0

There are different ways to install ESXi server. You can use interactive installation (CD/DVD, USB drive, and PXE boot), scripts or auto deploy. Here, I will use interactive method using CD/DVD media to install ESXi server. You can download installation ISO image from VMware. Let’s begin the installation. First, make sure the server is configured to boot from CD/DVD. Insert CD/DVD in to the DVD-ROM or map ISO image to virtual CD/DVD drive and boot the server from ISO image.

Once you start the server with ESXi installation media, you will be presented with ESXi standard boot menu as shown above. Choose ESXi standard installer to start the ESXi installer. Press [Tab] to toggle the selection and press [Enter] to choose the selection. As you can see above, you also have option to booth from local disk.

 Welcome screen appears as shown above. Press [Enter] to begin the installation of ESXi server.

 Press F11 to accept the license agreement.

Choose the storage and press [Enter] to continue. As you can see above the disk type is VMware Virtual S, this is because I am installing ESXi server on a VMware Workstation virtual machine. You can press F1 to see more details about the disk. If you are installing ESXi server on a local SAS storage, it will be listed as remote devices.

 Choose the keyboard layout. Press [Enter] to continue.

Enter the password for root user account. The password must be at least 7 characters long. Press [Enter] to continue.

To confirm the installation press F11.

The installation now begins.

Press [Enter] to reboot and complete the installation.

After the reboot, you can see the Direct Console User Interface (DCUI) above. You can see the ESXi build number, memory and processor information and IP address. As you can see above by default, ESXi is set to receive IP from DHCP server. You can press F2 to login to DCUI to change IP address, DNS, hostname and other information.